Hanging lamp for outdoors - Waterproof custom LED IP65 - Ring holder

View larger

Hanging lamp for outdoor use - Made-to-measure waterproof IP65 luminaire - Graphite silicone socket holder with ring

Reference:

Condition: New product

This suspension is intended to be installed outside. It is waterproof IP65.
Offered with 50 cm to 5 meters of flexible textile IP65 cable.
Cable color also to choose from.
The silicone holder is equipped with an E27 socket with a discreet ring allowing if you wish to mount any shade of your choice.

We offer you the option with metal shade black enamelled inside white diameter 300 mm.

Option with or without lift pad for deportation of the suspension (aluminium base color black rifle gun gun)

Installation instructions.

Brand LUMIX

More details

Send to a friend
Send to a friend

Hanging lamp for outdoor use - Made-to-measure waterproof IP65 luminaire - Graphite silicone socket holder with ring
This suspension is intended to be installed outside. It is waterproof IP65.
Offered with 50 cm to 5 meters of flexible textile IP65 cable.
Cable color also to choose from.
The silicone holder is equipped with an E27 socket with a discreet ring allowing if you wish to mount any shade of your choice.
We offer you the option with metal shade black enamelled inside white diameter 300 mm.
Option with or without lift pad for deportation of the suspension (aluminium base color black rifle gun gun)
Installation instructions.
Brand LUMIX
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel

Manufacturer LUMIX

Data sheet

Ready to send	5 to 7 days
Product made at the customer's request	YES
Socket	E27
Imput Voltage	220/230 Volts
Power	10 Watts max LED
Colour temperature (Kelvins)	10 Watts
IP Protection Rating	IP65
Protection class	Rosace class I and socket class II
Standard and conformity	CE - EN 60598-1 - EN 60598-2-1 Fixed General Purpose Luminaire- RoHS
Designer and manufacture	LUMIX in our workshops in France
Material	Thermoplastics and silicone
Electric cable	2 x 1 mm2 IP65
Warranty	2 years

More info

The IP 65 protection class protects the luminaire against dust and water jets in all directions. The cables are also IP65 and resistant to sun and heat.

Luminaire perfectly suited for regions with high precipitation and temperate humid tropical areas.

Delivered without bulb.

This luminaire accepts that 10 Watts Max LED bulbs (ST64, A60, Globes diameter 80 to 125 mm)

Please do not hesitate to contact us for any specific requests.
contact@lumixcreation.net

STANDARDS

Cable cable 2x1mm2 neoprene H05RN-F covered with fabric.
Diameter 7.6mm 2 x1mm2
Reference standard EN 50525-2-21.
European Low Voltage Directive 2014/35/EU.
Certificate No IMQ-HAR CA01.00683.

Class 5 flexible electrolytic red copper conductor conforming to IEC 60228.
EI 4 elastomer rubber insulation conforming to EN 50363-1.
Colour insulation meeting the requirements of HD 402 and EN 50525-1.
Elastomer rubber outer sheath EM 2 according to EN 50363-2-1.

-----

EIVA socket in black thermoplastic pre-filled with insulating gel.
Black silicone holder.
IP65 - Class II
Black silicone ceiling rosette with IP65 insulation gel pre-filled capsule - Class I

Dimensions of the silicone rosette
Diameter: 125 mm.
Height 40 mm
Hole diameter: 12 mm

ATTENTION : the EIVA socket is designed to accept only lED bulbs glass and tested to be compatible with the shapes A60, ST64, G95 and G125 that guarantee IP65 protection.

EC certified suspension lamp
Certificate of Compliance issued on request.

DO NOT RECEIVE SAFETY, CHOOSE THE QUALITY OF EUROPEAN BUSINESSES.